Section 45 (Automatic A/C-Heater Systems): Specifications

2004 Toyota Celica GT, StandardSECTION Specifications
WARNING: This page is about a different car, the 2003 Lexus ES 300 and 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS

Application Specification
Compressor Type Nippondenso 10PA20 10-Cyl.
Compressor Belt Tension
New 139-191 lbs. (63-87 kg)
Used 66-110 lbs. (30-50 kg)
Compressor Oil Capacity (1) 4.1 ozs.
Refrigerant (R-134a) Capacity 17.6-21.1 ozs.
System Operating Pressures (2)
High Side 199-228 psi (14-16 kg/cm2 )
Low Side 21-36 psi (1.5-2.5 kg/cm2 )
(1) Use Denso/ND-OIL 8 refrigerant oil.
(2) At 86-95Β°F (30-35Β°C) and engine speed at 1500 RPM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.