Remove Multi Display

2004 Toyota Celica GT, StandardSECTION Remove Multi Display
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 screws and multi display.
    Fig 1: Removing Multi Display
    G01317375Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
  2. Remove the 8 bolts and 2 brackets.
    Fig 2: Removing 8 Bolts & 2 Brackets
    G01317376Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.