SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004CELICA GT, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 318 (TRANSMISSION CONTROL SYSTEM TRANSAXLE)COUNTER DRIVEN GEARREASSEMBLY
2004 Toyota Celica GT, Standard

Counter Driven Gear: Reassembly

2004 Toyota Celica GT, StandardSECTION Reassembly
WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install new tapered roller bearing (MG1 side)  .

    Using SST and a press, press in a new tapered roller bearing.

    SST 09608-06041.

    Fig 1: Pressing Counter Driven Gear Tapered Roller Bearing In (MG1 side)
    G01066089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install new tapered roller bearing (MG2 side)  .

    Using SST and a press, press in a new tapered roller bearing.

    SST 09608-06041, 09950-60010 (09951-00370).

    Fig 2: Pressing Counter Driven Gear Tapered Roller Bearing In (MG2 side)
    G01066090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.