SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004CELICA GT, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 297 (BODY ELECTRICAL SYSTEMS (TROUBLESHOOTING))TROUBLESHOOTINGPROBLEM SYMPTOMS TABLEPOWER SEAT CONTROL SYSTEM
2004 Toyota Celica GT, Standard

Power Seat Control System

2004 Toyota Celica GT, StandardSECTION Power Seat Control System
WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
POWER SEAT CONTROL SYSTEM

Symptom/Suspect Area Refer To
Driver's Seat Does Not Operate
Power Seat Switch STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) and STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT .
Wire Harness POWER SEATS
Slide Operation Does Not Operate
Power Seat Switch STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) and STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT
Slide Motor STEP 5 - INSPECT SLIDE MOTOR OPERATION
Wire Harness POWER SEATS
Front Tilt Operation Does Not Operate
Power Seat Switch STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) and STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT
Front Tilt Motor STEP 7 - INSPECT FRONT TILT MOTOR OPERATION and STEP 8 - INSPECT FRONT TILT MOTOR PTC THERMISTOR OPERATION
Wire Harness POWER SEATS
Rear Lifter Operation Does Not Operate
Power Seat Switch STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) and STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT
Rear Lifter Motor STEP 9 - INSPECT REAR LIFTER MOTOR OPERATION and STEP 10 - INSPECT REAR LIFTER MOTOR PTC THERMISTOR OPERATION
Wire Harness POWER SEATS
Reclining Operation Does Not Operate
Power Seat Switch STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) and STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT
Reclining Motor STEP 11 - INSPECT RECLINING MOTOR OPERATION and STEP 12 - INSPECT RECLINING MOTOR PTC THERMISTOR OPERATION
Wire Harness POWER SEATS
Lumbar Support Operation Does Not Operate
Power Seat Switch (Lumbar Support Switch) STEP 1 - INSPECT POWER SEAT SWITCH CONTINUITY (SLIDE SWITCH) , STEP 2 - INSPECT POWER SEAT SWITCH CIRCUIT , STEP 3 - INSPECT LUMBAR SUPPORT SWITCH CONTINUITY and STEP 4 - INSPECT LUMBAR SUPPORT SWITCH CIRCUIT
Lumbar Support Motor STEP 3 - INSPECT LUMBAR SUPPORT SWITCH CONTINUITY and STEP 4 - INSPECT LUMBAR SUPPORT SWITCH CIRCUIT
Wire Harness POWER SEATS
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.