Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2004CELICA GT, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 167 (ANTI-LOCK BRAKE SYSTEM)DIAGNOSTIC TROUBLE CODE DEFINITIONS
2004 Toyota Celica GT, Standard
Diagnostic Trouble Code Definitions
2004 Toyota Celica GT, StandardSECTION Diagnostic Trouble Code Definitions
WARNING: This page is about a different car, the 2003 Toyota Prius, 2002 Toyota Prius, and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
DTC DEFINITIONS
| DTC | Code | Circuit/Malfunction | |||||
|---|---|---|---|---|---|---|---|
| ABS-Related | |||||||
| C0200 (1) | 31 (1) | RF Wheel Speed Sensor Signal Malfunction | |||||
| C0205 (1) | 32 (1) | LF Wheel Speed Sensor Signal Malfunction | |||||
| C0210 (1) | 33 (1) | RR Wheel Speed Sensor Signal Malfunction | |||||
| C0215 (1) | 34 (1) | LR Wheel Speed Sensor Signal Malfunction | |||||
| C0226 | 21 | Open/Shorted RF Solenoid, Defective ABS Actuator | |||||
| C0236 | 22 | Open/Shorted LF Solenoid, Defective ABS Actuator | |||||
| C0246 | 23 | Open/Shorted RR Solenoid, Defective ABS Actuator | |||||
| C0278 | 11 | Open Circuit In ABS Solenoid Valve Relay Circuit | |||||
| C0279 | 12 | Short In ABS Solenoid Valve Relay Circuit | |||||
| C1202 | 58 | Brake Fluid Level Low. Open Circuit In Brake Fluid Level Warning Switch Circuit | |||||
| C1211 | 61 | Malfunction In Linear Solenoid (SLA) Circuit | |||||
| C1212 | 62 | Malfunction In Linear Solenoid (SLR) Circuit | |||||
| C1213 | 63 | Malfunction In HV ECU Communication Circuit | |||||
| C1214 | 64 | Malfunction In Hydraulic System | |||||
| C1215 | 15 | Low Positive Voltage Of Linear Solenoid | |||||
| C1216 | 16 | High Positive Voltage Of Linear Solenoid | |||||
| C1217 | 25 | Malfunction In Regenerative Solenoid (SMC1) Circuit | |||||
| C1218 | 26 | Malfunction In Regenerative Solenoid (SMC2) Circuit | |||||
| C1219 | 27 | Malfunction In Regenerative Solenoid (SS) Circuit | |||||
| C1220 | 46 | Malfunction In Regulator (REG) Pressure Sensor | |||||
| C1221 | 46 | Malfunction In Front (FR) Pressure Sensor | |||||
| C1222 | 46 | Malfunction In Rear (RR) Pressure Sensor | |||||
| C1241 | 41 | Excessively Low/High Battery (IG1)Voltage | |||||
| C1242 (2) | 42 (2) | Open Circuit In IG2 Circuit | |||||
| C1246 | 46 | Malfunction In Master Cylinder (M/C) Pressure Sensor | |||||
| C1249 | 49 | Open In Stoplight Switch Circuit | |||||
| C1251 (2) | 51 (2) | Pump Motor Locked Up, Open Ground Circuit | |||||
| C1252 (2) | 52 (2) | Hydraulic Brake Booster Pump Motor | |||||
| C1253 (2) | 53 (2) | Malfunction In Hydro Motor Relay Circuit | |||||
| C1254 (2) | 54 (2) | Malfunction In Pressure Switch | |||||
| C1256 (2) | 56 (2) | Malfunction In Accumulator Low Pressure | |||||
| C1257 (2) | 57 (2) | Malfunction In Power Supply Drive Circuit | |||||
| C1259 | 59 | Malfunction In Regenerative Of HV ECU | |||||
| Speed Sensor-Related DTCs | |||||||
| C1271 | 71 | RF Speed Sensor Signal Low Voltage | |||||
| C1272 | 72 | LF Speed Sensor Signal Low Voltage | |||||
| C1273 | 73 | RR Speed Sensor Signal Low Voltage | |||||
| C1274 | 74 | LR Speed Sensor Signal Low Voltage | |||||
| C1275 | 75 | RF Speed Sensor Abnormal Change In Output Voltage | |||||
| C1276 | 76 | LF Speed Sensor Abnormal Change In Output Voltage | |||||
| C1277 | 77 | RR Speed Sensor Abnormal Change In Output Voltage | |||||
| C1278 | 78 | LR Speed Sensor Abnormal Change In Output Voltage | |||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.