Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA20034 RUNNER 2WD V6-4.0L (1GR-FE)REPAIR AND DIAGNOSISBODY AND FRAMEDESCRIPTION AND OPERATIONLOW VIBRATION
2003 Toyota 4 Runner 2WD V6-4.0L (1GR-FE)
Low Vibration
2003 Toyota 4 Runner 2WD V6-4.0L (1GR-FE)SECTION Low Vibration
Low Vibration, Low Noise Body
1. General
An effective application of vibration damping and noise suppresant materials reduces engine and road noise.
2. Sound Absorbing And Vibration Damping Materials
^ In place of the asphalt sheet used on the floor of the '02 model, the '03 model uses a coating-type vibration damping material to improve vibration damping performance and weight reduction.
^ A foamed material and urethane pads have been applied to various areas to reduce wind and road noise.
^ The layout and the cross section of the roof reinforcements have been optimized in order to generate vibrations at opposite phases, instead of the previous same-phase vibrations. As a result, the vibration on the roof panel has been significantly reduced, thus ensuring quieter operation.
3. Cab Mounting
The structure of the cab mounts has been revised and the rubber cushion has been supplemented. Accordingly, the vehicle's riding comfort has been improved and noise and vibration have been reduced.
1. General
An effective application of vibration damping and noise suppresant materials reduces engine and road noise.
2. Sound Absorbing And Vibration Damping Materials
^ In place of the asphalt sheet used on the floor of the '02 model, the '03 model uses a coating-type vibration damping material to improve vibration damping performance and weight reduction.
^ A foamed material and urethane pads have been applied to various areas to reduce wind and road noise.
^ The layout and the cross section of the roof reinforcements have been optimized in order to generate vibrations at opposite phases, instead of the previous same-phase vibrations. As a result, the vibration on the roof panel has been significantly reduced, thus ensuring quieter operation.
3. Cab Mounting
The structure of the cab mounts has been revised and the rubber cushion has been supplemented. Accordingly, the vehicle's riding comfort has been improved and noise and vibration have been reduced.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.