Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2002HIGHLANDER 4WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSDIAGRAMSELECTRICAL DIAGRAMSSERVICE HINTS
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)
Service Hints
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)SECTION Service Hints
B9 (A), B12 (D) BODY ECU
(D) 9 - GROUND : Always approx. 12 volts
(A) 2, (D) 7 - GROUND : Always continuity
(A) 5 - GROUND : Approx. 12 volts with the ignition SW at ON position
P5 POWER WINDOW MASTER SW WITH ECU
9,10 - GROUND : Always approx. 12 volts
2 - GROUND : Always continuity
P10, P11, P12 POWER WINDOW SW FRONT RH, REAR LH, RH
7 - GROUND : Always approx. 12 volts
1 - GROUND : Always continuity
(D) 9 - GROUND : Always approx. 12 volts
(A) 2, (D) 7 - GROUND : Always continuity
(A) 5 - GROUND : Approx. 12 volts with the ignition SW at ON position
P5 POWER WINDOW MASTER SW WITH ECU
9,10 - GROUND : Always approx. 12 volts
2 - GROUND : Always continuity
P10, P11, P12 POWER WINDOW SW FRONT RH, REAR LH, RH
7 - GROUND : Always approx. 12 volts
1 - GROUND : Always continuity
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.