Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2002HIGHLANDER 4WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSAIR BAG SYSTEMSIMPACT SENSORTESTING AND INSPECTION
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)
Impact Sensor: Testing and Inspection
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)SECTION Testing and Inspection
FRONT AIRBAG SENSOR(VEHICLE NOT INVOLVED IN COLLISION)
Do a diagnostic system check. *
FRONT AIRBAG SENSOR(VEHICLE INVOLVED IN COLLISION)
a. Do a diagnostic system check. *
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following items even if the airbag was not deployed:
- Bracket deformation
- Paint peeling off the bracket
- Cracks, dents or chips in the case
- Cracks, dents, chipping and scratches in the connector
- Peeling off of the label or damage to the serial number
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Displaying & Reading Trouble Codes
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.