Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2002HIGHLANDER 4WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSSERVICE PRECAUTIONS
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)
Instrument Panel, Gauges and Warning Indicators: Service Precautions
2002 Toyota Highlander 4WD L4-2.4L (2AZ-FE)SECTION Service Precautions
SRS AIRBAG PRECAUTION
TOYOTA vehicles are equipped with an SRS (Supplemental Restraint System) such as the driver airbag, front passenger airbag, side airbag, curtain airbag (if equipped), and seat belt pretensioner.
Failure to carry out service operation in the correct sequence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a serious accident. Before servicing (including removal or installation of parts, inspection or replacement), be sure to read the precautionary notices in RESTRAINT SYSTEMS.
TOYOTA vehicles are equipped with an SRS (Supplemental Restraint System) such as the driver airbag, front passenger airbag, side airbag, curtain airbag (if equipped), and seat belt pretensioner.
Failure to carry out service operation in the correct sequence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a serious accident. Before servicing (including removal or installation of parts, inspection or replacement), be sure to read the precautionary notices in RESTRAINT SYSTEMS.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.