Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2001LANDCRUISER V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSCAMSHAFT BEARING TORQUE AND SEQUENCE
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)
Camshaft Bearing Torque and Sequence
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)SECTION Camshaft Bearing Torque and Sequence
Camshaft Bearing Cap
Bolt length:
94 mm (3.70 inch) for A
72 mm (2.83 inch) for B
25 mm (0.98 inch) for C
52 mm (2.05 inch) for D
38 mm (1.50inch) for E
Tightening Sequence:
RH Camshaft
LH Camshaft
Torque:
Bolt C: 7.5 Nm (80 kgf-cm, 69 inch lbs.)
Others 16 Nm (160 kgf-cm, 12 ft. lbs.)
Bolt length:
94 mm (3.70 inch) for A
72 mm (2.83 inch) for B
25 mm (0.98 inch) for C
52 mm (2.05 inch) for D
38 mm (1.50inch) for E
Tightening Sequence:
RH Camshaft
LH Camshaft
Torque:
Bolt C: 7.5 Nm (80 kgf-cm, 69 inch lbs.)
Others 16 Nm (160 kgf-cm, 12 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.