Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2001LANDCRUISER V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSACCELERATOR PEDAL POSITION SENSORSPECIFICATIONS
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)
Accelerator Pedal Position Sensor: Specifications
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)SECTION Specifications
Electric Throttle Control (Part 1):
Throttle Body (Part 2):
Throttle Position Sensor
Torque:....................2.0 N.m (20 kgf.cm, 18 in..lbf)
Throttle Control Motor with the 3 screws
Torque:...................3.4 N.m (35 kgf.cm, 30 in..lbf)
Throttle Control Motor Cover and Motor Assembly with the 6 screws
Torque:...................3.4 N.m (35 kgf.cm, 30 in..lbf)
Accelerator Pedal Position Sensor.
Torque:....................5.4 N.m (55 kgf.cm, 48 in.. lbf)
Throttle Body.
Torque:...................18 N.m (185 kgf.cm, 13 ft.lbf)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.