Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2001LANDCRUISER V8-4.7L (2UZ-FE)REPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER BLOCK ASSEMBLYSPECIFICATIONSCONNECTING ROD BOLT/NUT
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)
Connecting Rod Bolt/Nut
2001 Toyota Landcruiser V8-4.7L (2UZ-FE)SECTION Connecting Rod Bolt/Nut
Connecting Rod Cap Bolts
Step 1 24.5 Nm (250 kgf-cm, 18 ft. lbs.)
Step 2 Turn 90°
Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
Install and alternately tighten the 2 connecting rod cap bolts in several passes.
Step 1 24.5 Nm (250 kgf-cm, 18 ft. lbs.)
Step 2 Turn 90°
Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
Install and alternately tighten the 2 connecting rod cap bolts in several passes.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.