Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2001HIGHLANDER 2WD L4-2.4L (2AZ-FE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSDIAGNOSTIC TESTER - CUSTOMIZE FUNCTION
2001 Toyota Highlander 2WD L4-2.4L (2AZ-FE)
Diagnostic Tester - Customize Function
2001 Toyota Highlander 2WD L4-2.4L (2AZ-FE)SECTION Diagnostic Tester - Customize Function
SPECIAL SERVICE TOOLS
SS005-01
June 15, 2001
Title:
CUSTOMIZE FUNCTION - DIAGNOSTIC
PROGRAM CARD VERSION 8.0
Models:
'01 Highlander & Sequoia
Introduction
The Customize feature for the Toyota Diagnostic Tester allows Toyota Dealers to customize many of the electrical functions on 2001 model year Sequoia and Highlander vehicles to match individual customer desires. This bulletin will provide you with a comprehensive list of available features for customization.
NOTE:
These functions require version 8.0a, or later, software. Diagnostic Tester software can be updated using TIS. Click the link on the TIS home page to download.
Applicable Vehicles
^ 2001 model year Highlander & Sequoia vehicles.
Required Tools & Material
NOTE:
Additional Diagnostic Tester Kits or Program Cards may be ordered by calling OTC at 1-800-933-8335.
Service Procedure
In cases where dealers maintain a vehicle service history database, a detailed description, including the 'Item Selected", the old setting and the new setting should be entered into the vehicle's service history as a note.
Warranty Information
Operation Procedure
The following steps show the user how to access the "FUNCTION SELECT" screen for customizing.
1. Insert the key into the ignition key cylinder and turn to the ON position.
2. Connect the Toyota Diagnostic Tester to DLC3 and press the "ON" key.
3. Using the Diagnostic Tester, follow the screen flow to access the customize function select menu.
SS005-01
June 15, 2001
Title:
CUSTOMIZE FUNCTION - DIAGNOSTIC
PROGRAM CARD VERSION 8.0
Models:
'01 Highlander & Sequoia
Introduction
The Customize feature for the Toyota Diagnostic Tester allows Toyota Dealers to customize many of the electrical functions on 2001 model year Sequoia and Highlander vehicles to match individual customer desires. This bulletin will provide you with a comprehensive list of available features for customization.
NOTE:
These functions require version 8.0a, or later, software. Diagnostic Tester software can be updated using TIS. Click the link on the TIS home page to download.
Applicable Vehicles
^ 2001 model year Highlander & Sequoia vehicles.
Required Tools & Material
NOTE:
Additional Diagnostic Tester Kits or Program Cards may be ordered by calling OTC at 1-800-933-8335.
Service Procedure
In cases where dealers maintain a vehicle service history database, a detailed description, including the 'Item Selected", the old setting and the new setting should be entered into the vehicle's service history as a note.
Warranty Information
Operation Procedure
The following steps show the user how to access the "FUNCTION SELECT" screen for customizing.
1. Insert the key into the ignition key cylinder and turn to the ON position.
2. Connect the Toyota Diagnostic Tester to DLC3 and press the "ON" key.
3. Using the Diagnostic Tester, follow the screen flow to access the customize function select menu.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.