Tundra - Caster

2000 Toyota Tacoma Base, 2D Pickup, 2.4 L, StandardSECTION Tundra - Caster
WHEEL ALIGNMENT SPECIFICATIONS (TUNDRA - CASTER)

Application (1) Specification
2WD
3.4L A/T
Regular Cab 1°43' +- 45' (1.72° +- .75°)
Extended Cab
Limited 1°52' +- 45' (1.87° +- .75°)
SR5
P245/70R16 1°46' +- 45' (1.76° +- .75°)
P265/70R16 1°47' +- 45' (1.79° +- .75°)
3.4L M/T
Regular Cab
Standard 1°40' +- 45' (1.66° +- .75°)
Extended Cab
SR5
P245/70R16 1°43' +- 45' (1.71° +- .75°)
P265/70R16 1°44' +- 45' (1.74° +- .75°)
4.7L-A/T
Extended Cab
Limited 1°59' +- 45' (1.98° +- .75°)
SR5
P245/70R16 1°53' +- 45' (1.89° +- .75°)
P265/70R16 1°55' +- 45' (1.92° +- .75°)
4WD
3.4L A/T
Regular Cab
SR5
P245/70R16 1°08' +- 45' (1.13° +- .75°)
P265/70R16 1°10' +- 45' (1.16° +- .75°)
Extended Cab
Limited 1°08' +- 45' (1.13° +- .75°)
Off-Road Option 1°10' +- 45' (1.17° +- .75°)
SR5
P245/70R16 1°01' +- 45' (1.02° +- .75°)
P265/70R16 1°04' +- 45' (1.06° +- .75°)
Off-Road Option 1°06' +- 45' (1.10° +- .75°)
3.4L M/T
Regular Cab
SR5
P245/70R16 1°04' +- 45' (1.07° +- .75°)
P265/70R16 1°06' +- 45' (1.10° +- .75°)
Extended Cab
SR5
P245/70R16 0°58' +- 45' (.97° +- .75°)
P265/70R16 1°01' +- 45' (1.01° +- .75°)
Off-Road Option 1°03' +- 45' (1.05° +- .75°)
4.7L-AT
Regular Cab
SR5
P245/70R16 1°05' +- 45' (1.09° +- .75°)
P265/70R16 1°07' +- 45' (1.12° +- .75°)
Extended Cab
Limited 1°17' +- 45' (1.29° +- .75°)
Off-Road Option 1°20' +- 45' (1.33° +- .75°)
4.7L-AT
Extended Cab
Limited
P245/70R16 1°12' +- 45' (1.20° +- .75°)
P265/70R16 1°14' +- 45' (1.23° +- .75°)
Off-Road Option 1°16' +- 45' (1.27° +- .75°)
(1) Measurement is in degrees, minutes, +- minutes (decimal degrees).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.