Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2000TACOMA BASE, 2D PICKUP, 2.4 L, STANDARDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESWHEEL ALIGNMENT SPECIFICATIONSRAV4 - 4WD

2000 Toyota Tacoma Base, 2D Pickup, 2.4 L, Standard

RAV4 - 4WD

2000 Toyota Tacoma Base, 2D Pickup, 2.4 L, StandardSECTION RAV4 - 4WD

WHEEL ALIGNMENT SPECIFICATIONS (RAV4 - 4WD)

Application

Preferred

Range

215/70R16

Camber ⁽¹⁾

Front

-0.25

-1.0 To 0.5

Rear

2-Door

-1.08

-1.83 To -0.33

4-Door

-0.92

-1.67 To -0.17

Caster ⁽¹⁾

1.33

0.58 To 2.08

Steering Axis Inclination ⁽¹⁾

10.75

.....

Toe-In ⁽²⁾

Front

0 (0)

-0.08 To 0.08 (-2 To 2)

Rear

0.12 (3)

0.04 To 0.2 (1 To 5)

Toe-In ⁽¹⁾

Front

-0.2 To 0.2

Rear

0.3

0.1 To 0.5

Toe-Out On Turns ⁽¹⁾

Inner

33.25

.....

Outer

28.08

.....

235/60R16

Camber ⁽¹⁾

Front

-0.33

-1.08 To 0.42

Rear

2-Door

-1.42

-2.17 To -0.67

4-Door

-1.33

-2.08 To -0.58

Caster ⁽¹⁾

1.42

0.67 To 2.17

Steering Axis Inclination ⁽¹⁾

.....

Toe-In ⁽²⁾

Front

0 (0)

-0.08 To 0.08 (-2 To 2)

Rear

2-Door

0.16 (4)

0.08 To 0.24 (2 To 6)

4-Door

0.12 (3)

0.4 To 0.2 (1 To 5)

Toe-In ⁽¹⁾

Front

-0.2 To 0.2

Rear

2-Door

0.4

0.2 To 0.6

4-Door

0.3

0.1 To 0.5

Toe-Out On Turns ⁽¹⁾

Inner

33.25

.....

Outer

28.08

.....

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.