Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA2000TACOMA BASE, 2D PICKUP, 2.4 L, STANDARDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESWHEEL ALIGNMENT SPECIFICATIONSCELICA

2000 Toyota Tacoma Base, 2D Pickup, 2.4 L, Standard

Wheel Alignment Specifications: CELICA

2000 Toyota Tacoma Base, 2D Pickup, 2.4 L, StandardSECTION CELICA

WHEEL ALIGNMENT SPECIFICATIONS (CELICA)

Application

Preferred

Range

1999

Camber ⁽¹⁾

Front

-0.77

-0.02 To -1.52

Rear

-1.17

-0.42 To -1.92

Caster ⁽¹⁾

2.08

1.33 To 2.83

Steering Axis Inclination ⁽¹⁾

14.97

.....

Toe-In ⁽²⁾

Front

0 (0)

-0.08 To 0.08 (-2 To 2)

Rear

0.14 (3.5)

0.06 To 0.22 (1.5 To 5.5)

Toe-In ⁽¹⁾

Front

-0.2 To 0.2

Rear

0.35

0.15 To 0.55

Toe-Out On Turns ⁽¹⁾

Inner

36.90

.....

Outer

30.73

.....

2000

Camber ⁽¹⁾

Front

195/60R15

-0.47

-1.22 To 0.28

205/55R15

-0.42

-1.17 To 0.33

205/50R16

-0.48

-1.23 To 0.27

Rear

-1.18

-1.93 To -0.43

Caster ⁽¹⁾

195/60R15

2.12

1.37 To 2.87

205/55R15

2.02

1.27 To 2.77

205/50R16

2.03

1.28 To 2.78

Steering Axis Inclination ⁽¹⁾

195/60R15

13.15

.....

205/55R15

13.07

.....

205/50R16

13.20

.....

Toe-In ⁽²⁾

Front

0 (0)

-0.08 To 0.08 (-2 To 2)

Rear

0.12 (3.0)

0.04 To 0.20 (0.1 To 0.5)

Toe-In ⁽¹⁾

Front

-0.2 To 0.2

Rear

-0.2 To 0.2

Toe-Out On Turns ⁽¹⁾

Inner

195/60R15

38.68

.....

205/55R15

38.77

.....

205/50R16

38.63

.....

Outer

195/60R15

33.33

.....

205/55R15

33.42

.....

205/50R16

33.32

.....

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.