Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Suspension System: Description
Vehicles are equipped with front wheel drive and independent MacPherson strut (shock absorber) front suspension. RAV4 can also be equipped with all wheel drive. Suspension consists of vertically mounted strut assemblies, control arms, and stabilizer bar. Shock absorbers are mounted between inner fender and steering knuckle. Tie rod ends connect rack and pinion steering to steering knuckle. Ball joint connects steering knuckle to lower control arm. On some models, a suspension crossmember is used. A stabilizer bar attaches to lower control arms.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.