SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1999CELICA 2D CONVERTIBLE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESENSOR RANGE CHARTSENGINE CONTROLS - SENSOR OPERATING RANGE CHARTSINTRODUCTIONTHROTTLE POSITION (TP) SENSOR
1999 Toyota Celica 2D Convertible, Standard

Throttle Position (TP) Sensor

1999 Toyota Celica 2D Convertible, StandardSECTION Throttle Position (TP) Sensor

For terminal identification and testing procedures, see ENGINE SENSORS & SWITCHES in appropriate SYSTEM & COMPONENT TESTING article.

AVALON TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
3.0L Fully Closed VTA & E2 200-6300
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
CAMRY & CAMRY SOLARA TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
2.2L 4-Cyl. Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
3.0L V6 Fully Closed VTA & E2 200-6300
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
CELICA TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
2.2L Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
COROLLA TP SENSOR RESISTANCE SPECIFICATIONS

Application Throttle Position Terminals Ohms
1.8L Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
LAND CRUISER TP SENSOR RESISTANCE SPECIFICATIONS

Application Terminals Ohms
4.7L VC & E2 (1) 1250-2350
(1) Resistance at 68°F (20°C).
RAV4 TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
2.0L Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
SIENNA TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
3.0L Fully Closed VTA & E2 200-6300
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
TACOMA TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
2.4L 4-Cyl. & 2.7L 4-Cyl. Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
3.4L V6 Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
4RUNNER TP SENSOR RESISTANCE SPECIFICATIONS (1)

Application Throttle Position Terminals Ohms
2.7L 4-Cyl. Fully Closed VTA & E2 200-5700
Fully Open VTA & E2 2000-10,200
VC & E2 2500-5900
3.4L V6 Fully Closed VTA & E2 280-6400
Fully Open VTA & E2 2000-11,600
VC & E2 2700-7700
(1) Apply vacuum to throttle opener before checking TP sensor.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.