Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1999CELICA 2D CONVERTIBLE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEMADJUSTMENTSBRAKE PEDAL FREE PLAY
1999 Toyota Celica 2D Convertible, Standard
Brake Pedal Free Play
1999 Toyota Celica 2D Convertible, StandardSECTION Brake Pedal Free Play
NOTE:
Stoplight switch adjustment should be performed before brake pedal free play adjustment is made. See STOPLIGHT SWITCH .
- Brake pedal free play is distance brake pedal travels (with engine stopped) before encountering resistance. To measure brake pedal free play, press brake pedal several times to exhaust vacuum from power brake unit. Press brake pedal and measure travel until initial resistance occurs.
- Brake pedal free play should be .04-.24" (1-6 mm). If free play is not within specification, adjust by rotating push rod. See Figure. After adjusting brake pedal free play, check brake pedal height. See BRAKE PEDAL HEIGHT .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.