Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1999CAMRY XLE, 2.2 GREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM W/TRACTION CONTROL SYSTEMADJUSTMENTSBRAKE PEDAL FREE PLAY
1999 Toyota Camry XLE, 2.2 G
Brake Pedal Free Play
1999 Toyota Camry XLE, 2.2 GSECTION Brake Pedal Free Play
NOTE:
Stoplight switch adjustment should be performed before brake pedal free play adjustment is made. See STOPLIGHT SWITCH .
- Brake pedal free play is distance brake pedal travels before feeling resistance with engine stopped. To check brake pedal free play, depress brake pedal several times to exhaust vacuum from power brake unit. Depress brake pedal and measure travel until initial resistance is felt.
- Brake pedal free play should be .04-.24" (1.0-6.0 mm). If free play is not within specification, adjust by turning brake booster push rod. After adjusting brake pedal free play, check brake pedal height. See BRAKE PEDAL HEIGHT . Install air duct and instrument panel lower finish panel (if removed).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.