Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
A/T Models
1999 Toyota Camry XLE, 2.2 GSECTION A/T Models
- Disconnect electrical connector from PNP switch. The PNP switch is mounted on side of transmission/transaxle. Note terminal identification. See Fig 1.
- Using ohmmeter, check for continuity between specified terminals with shift lever in proper positions. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS table. If proper continuity does not exist, adjust or replace switch as necessary.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS
| Shift Lever Position | Continuity Between Terminals No. | |
|---|---|---|
| Camry, Camry Solara, Celica, Corolla & RAV4 | ||
| Park | 2 & 7; 5 & 6 | |
| Reverse | 2 & 8 | |
| Neutral | 2 & 9; 5 & 6 | |
| Drive | 2 & 10 | |
| 2 | 2 & 3 | |
| Low | 2 & 4 | |
| Tacoma & 4Runner | ||
| Park | 4 & 7; 5 & 6 | |
| Reverse | 4 & 8 | |
| Neutral | 4 & 10; 5 & 6 | |
| Drive | 4 & 9 | |
| 2 | 2 & 4 | |
| Low | 3 & 4 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.