SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1997TERCEL 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROLS - SPECIFICATIONSQUICK-SERVICESERVICE INTERVALS & SPECIFICATIONS
1997 Toyota Tercel 4D Sedan, Automatic

Service Intervals & Specifications

1997 Toyota Tercel 4D Sedan, AutomaticSECTION Service Intervals & Specifications
REPLACEMENT INTERVALS

Component Months Miles
Air Filter 24 30,000
Camshaft Timing Belt (1)
Normal Service (2) (2)
Severe Service 48 60,000
Coolant 24 30,000
Engine Oil & Filter (1)
Normal Service 6 7500
Severe Service 4 5000
Spark Plugs 24 30,000
Automatic Transmission Fluid (1)
Normal Service (2) (2)
Severe Service 12 15,000
Manual Transmission Fluid (1)
Normal Service (2) (2)
Severe Service 24 30,000
Repack Rear Wheel Bearings 24 30,000
(1) Different interval is required for normal service and severe service. Severe service is described as trailer towing, police, taxi, local delivery service, operating for short trips in freezing temperatures or operating in dusty conditions.
(2) Service interval is not available from manufacturer at time of publication.
VALVE CLEARANCE ADJUSTMENT INTERVALS

Application Months Miles
Tercel (1) 48 60,000
(1) Manufacturer recommends listening for valve noise from excessive valve clearance. Adjust valve clearance if valve noise exists.
BELT ADJUSTMENT (1)

Application New Belt (2) Used Belt
A/C 160 (73) 100 (45)
Generator 160 (73) 100 (45)
Power Steering 180 (82) 120 (54)
(1) Tension In Lbs. (kg) Using Burroughs Tension Gauge
(2) Used belt is a belt in operation at least 5 minutes.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.