Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA1997PREVIA DX, RWDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESALIGNMENT SPECIFICATIONSCOROLLA

1997 Toyota Previa DX, RWD

Alignment Specifications: Corolla

1997 Toyota Previa DX, RWDSECTION Corolla

WHEEL ALIGNMENT SPECIFICATIONS (COROLLA)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-0.18

-0.93 To 0.57

Rear

-0.92

-1.67 To 0.17

Caster ⁽¹⁾

1.32

0.57 To 2.07

Steering Axis Inclination ⁽¹⁾

12.63

N/A

Toe-In ⁽²⁾

Front

0.04 ⁽¹⁾

-0.04 To 0.12 (-1 To 3)

Rear

0.16 ⁽³⁾

0.08 To 0.24 (2 To 6)

Toe-In ⁽¹⁾

Front

0.10

-0.1 To 0.3

Rear

0.4

0.2 To 0.6

Toe-Out On Turns ⁽¹⁾⁽³⁾

Inner

39.22

N/A

Outer

33.37

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

⁽³⁾	If vehicle is equipped with manual steering, inner is 39.02 degrees, outer is 33.37 degrees.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.