SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1997PREVIA DX, RWDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESALIGNMENT SPECIFICATIONSCAMRY
1997 Toyota Previa DX, RWD

Alignment Specifications: CAMRY

1997 Toyota Previa DX, RWDSECTION CAMRY
WHEEL ALIGNMENT SPECIFICATIONS (CAMRY)

Application Preferred Range
4-Cylinder
Camber (1)
Front -0.6 -1.35 To 0.15
Rear -0.7 -1.45 To 0.05
Caster (1)
Front 2.17 1.42 To 2.92
Rear N/A N/A
Steering Axis Inclination (1) 13.02 N/A
Toe-In (2)
Front 0 (0) -0.08 To 0.08 (-2 To 2)
Rear 0.16 (4) 0.08 To 0.24 (2 To 6)
Toe-In (1)
Front 0 -0.2 To 0.2
Rear 0.4 0.2 To 0.6
Toe-Out On Turns (1)(3)
Inner 37.20 N/A
Outer 32.35 N/A
V6
Camber (1)
Front -0.62 -1.37 To 0.13
Rear -0.75 -1.5 To 0
Caster (1)
Front 2.18 1.43 To 2.93
Rear N/A N/A
Steering Axis Inclination (1) 13.7 N/A
Toe-In (2)
Front 0 (0) -0.08 To 0.08 (-2 To 2)
Rear 0.16 (4) 0.08 To 0.24 (2 To 6)
Toe-In (1)
Front 0 -0.2 To 0.2
Rear 0.4 0.2 To 0.6
Toe-Out On Turns (1)(3)
Inner 37.20 N/A
Outer 32.35 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
(3) If vehicle is equipped with P205/65R15 tires, inner is 35.78 degrees, outer is 31.42 degrees.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.