Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA1997PREVIA DX, RWDREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESALIGNMENT SPECIFICATIONS4RUNNER

1997 Toyota Previa DX, RWD

Alignment Specifications: 4RUNNER

1997 Toyota Previa DX, RWDSECTION 4RUNNER

WHEEL ALIGNMENT SPECIFICATIONS (4RUNNER)

Application

Preferred

Range

2WD

Camber ⁽¹⁾

-0.25

-1 To 0.5

Caster ⁽¹⁾

3.08

2.33 To 3.83

Steering Axis Inclination ⁽¹⁾

N/A

Toe-In ⁽²⁾

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-In ⁽¹⁾

0.2

0 To 0.4

Toe-Out On Turns ⁽¹⁾

Inner

N/A

Outer

N/A

4WD

Camber ⁽¹⁾

0.17

-0.58 To 0.92

Caster ⁽¹⁾

2.42

1.67 To 3.17

Steering Axis Inclination ⁽¹⁾

10.58

N/A

Toe-In ⁽²⁾

0.08 ⁽²⁾

0 To 0.16 (0 To 4)

Toe-In ⁽¹⁾

0.2

0 To 0.4

Toe-Out On Turns ⁽¹⁾

Inner

N/A

Outer

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.