SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1995T100 DX, RWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & ADJUSTMENT PROCEDURESWHEEL ALIGNMENT SPECIFICATIONS
1995 Toyota T100 DX, RWD, Standard

Wheel Alignment Specifications

1995 Toyota T100 DX, RWD, StandardSECTION Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS (2WD)

Application Preferred Range
Camber (1) 0.42 -0.33 To 1.17
Caster (1) 2.58 1.83 To 3.33
Steering Axis Inclination (1) 12.17 N/A
Toe-In (2) 0.12 (3) 0.04 To 0.2 (1 To 5)
Toe-In (1) 0.25 -0.05 To 0.45
Toe-Out On Turns (1)
Inner 40.67 N/A
Outer 35.08 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
WHEEL ALIGNMENT SPECIFICATIONS (4WD)

Application Preferred Range
Camber (1) 0.67 -0.08 To 1.42
Caster (1) 1.58 0.83 To 2.33
Steering Axis Inclination (1) 11.92 N/A
Toe-In (2) 0.12 (3) 0.04 To 0.2 (1 To 5)
Toe-In (1) 0.3 0.1 To 0.5
Toe-Out On Turns (1)
Inner 32.75 N/A
Outer 30.5 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.