SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1995T100 DX, RWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICALENGINE MECHANICAL (2.4L 4-CYL)REMOVAL & INSTALLATIONTIMING CHAIN & SPROCKET SPECIFICATIONSNOTES
1995 Toyota T100 DX, RWD, Standard

Timing Chain & Sprocket Specifications: Notes

1995 Toyota T100 DX, RWD, StandardSECTION Notes
TIMING CHAIN & SPROCKET SPECIFICATIONS

Application In. (mm)
No. 1 Timing Chain Length 5.807 (147.50)
Timing Chain & Sprocket Outside Diameter
No. 1 Timing Chain & Camshaft Sprocket 4.480 (113.80)
No. 1 Timing Chain & Crankshaft Sprocket 2.339 (59.40)
  1. Ensure plunger moves freely inward and outward on No. 2 timing chain tensioner when pawl is raised upward.See Fig 3. Release pawl and ensure plunger is locked and does not move when pressure is applied on plunger.
  2. Ensure oil jet on rear of No. 2 timing chain tensioner is not clogged or damaged by applying air pressure to rear of No. 2 timing chain tensioner. Air should pass out holes on body of No. 2 timing chain tensioner. See Fig 3. Replace No. 2 timing chain tensioner if operation is not as specified.
Fig 1: Measuring No. 1 Timing Chain Tensioner Slipper & Vibration Damper Wear
G96D19011Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.