Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1994TERCEL DX, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSSHIFT INTERLOCK SYSTEMSTESTINGSHIFT LOCK SOLENOID
1994 Toyota Tercel DX, 4D Sedan, Standard
Shift Lock Solenoid
1994 Toyota Tercel DX, 4D Sedan, StandardSECTION Shift Lock Solenoid
- Disconnect electrical connector from shift lock solenoid. Using ohmmeter, measure resistance between electrical terminals of shift lock solenoid.
- Replace shift lock solenoid if resistance is not within specification. See SHIFT LOCK SOLENOID RESISTANCE SPECIFICATIONS table.
- Apply battery voltage between electrical terminals of shift lock solenoid. Replace shift lock solenoid if operating sound cannot be heard.
SHIFT LOCK SOLENOID RESISTANCE SPECIFICATIONS
| Application | Ohms |
|---|---|
| Camry, Celica, ES300, GS300 & MR2 | 21-27 |
| Corolla, Paseo & Tercel | 30-35 |
| Land Cruiser, LS400, Pickup, SC300, SC400, Supra & 4Runner | 20-28 |
| Pickup & 4Runner | 29-36 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.