Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Idle Speed Control (ISC) System
Engine idle speed is controlled by the ECU. The ECU contains preprogrammed information which contains specific engine speed values for different engine operating conditions.
The ECU receives signals from such sensors as the coolant temperature sensor and air conditioner sensor. Using this information, the ECU transmits a command signal to the ISC valve in the throttle body.
The ISC valve opens and closes the idle air by-pass to control the amount of air which by-passes throttle valve. The greater the amount of air which is by-passed around the throttle valve, the greater the engine idle speed.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.