Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1986CELICA GT, 2D HATCHBACK, STANDARDREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
1986 Toyota Celica GT, 2D Hatchback, Standard
Quick Lookups: Fluids
1986 Toyota Celica GT, 2D Hatchback, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | 2.0L Eng | 2.10 QTS. | 1.98 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 2.0L Eng | 1.70 QTS. | 1.6 L | DEXRON II | S | ||
| Engine Coolant | 2.0L Eng | 7.40 QTS. | 7 L | Ethylene glycol antifreeze (Do not use alcohol type) | S | ||
| Engine Oil | 2.0L Eng | w/Filter | 4.10 QTS. | 3.88 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F) | S | |
| Engine Oil | 2.0L Eng | w/o Filter | 3.80 QTS. | 3.59 L | SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F) | S | |
| Manual Transmission Fluid | 2.0L Eng | 2.70 QTS. | 2.55 L | Automatic Transmission Fluid DEXRON II | S | ||
| Power Steering Fluid | N/A | N/A | Dexron or Dexron II | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.