Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1984CELICA SUPRA LREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCRUISE CONTROL SYSTEMSTESTINGSWITCHESCRESSIDA
1984 Toyota Celica Supra L
Cruise Control Systems: Testing: Switches: Cressida
1984 Toyota Celica Supra LSECTION Cressida
- With main switch on, there should be continuity between terminals 3 and 5, 3 and 4 and 1 and 2. In off position, there should be continuity between 3 and 5 and 3 and 4. To test clutch switch, check that there is continuity between terminals 2 and 3 with the pedal depressed and none with it returned.
- Stop light switch should have continuity between 1 and 2 terminals with pedal depressed and between terminals 3 and 4 with pedal returned. Parking brake switch must show continuity between the terminals with the brake pulled and none with it released.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.