Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTOYOTA1965LAND CRUISERREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCHARGING SYSTEMSALTERNATORS - NIPPONDENSOSPECIFICATIONS

1965 Toyota Land Cruiser

Alternators - NIPPONDENSO: Specifications

1965 Toyota Land CruiserSECTION Specifications

Rated Output @ 3500 RPM

Application ⁽¹⁾

Amps

⁽²⁾ Volts

21010

21011

22010

22011

⁽³⁾ 25

22012

24031

25010

31031

31032

33010

13.5-14.8

33011

33030

⁽⁴⁾ 45

40010

13.5-14.8

40011

13.5-14.8

40060

13.5-14.8

41010

13.5-14.8

41011

13.5-14.8

41012

13.5-14.8

41032

13.5-14.8

45010

45020

60012

60021

60022

60031

60032

60033

60040

⁽¹⁾	All part numbers start with 27020 prefix.

⁽²⁾	Nominal voltage, 12.

⁽³⁾	Optional for part number 27020 22011 is 30 amps.

⁽⁴⁾	Amps, for part number 27020 33030 in 1973 is 50.

Coil Resistance (Ohms)

Application ⁽¹⁾

Rotor

Stator

21010

3.6

.....

21011

3.6

.....

22010

4.2

.....

22011

4.2

.....

22012

4.2

.....

24031

4.2

.....

25010

4.2

0.24

31031

4.2

.....

31032

4.2

.....

33010

4.2

0.37

33011

4.2

0.37

33030

4.8

0.24

40010

3.6

.....

40011

3.6

.....

40060

3.6

.....

41010

.....

41011

4.2

0.24

41012

4.20

0.24

41032

4.2

0.37

45010

4.2

0.37

45020

4.20

0.37

60012

.....

60021

.....

60022

.....

60031

4.2

.....

60032

.....

60033

4.2

.....

60040

4.8

.....

⁽¹⁾	All part numbers start with 27020 prefix.

Minimum Brush Length

Application ⁽¹⁾

In. (mm)

21010, 21011, 22010

354(9)

22011, 22012, 24031

354 (9)

40010, 40011, 40060

354 (9)

25010, 31031, 31032

334(8.5)

33010, 33011, 33030

334 (8.5)

41010, 41011, 41012

334(8.5)

41032, 45010, 45020

334 (8.5)

60012, 60021, 60022

217(5.5)

60031, 60032, 60033

217(5.5)

60040

217 (5.5)

⁽¹⁾	All part numbers start with 27020 prefix.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.