Quick Connect

2018 Tesla Model 3 BaseSECTION Quick Connect
NOTE: A quick connect is only possible after a successful quick disconnect.
  1. Bring the laptop and vehicle interface cable to the vehicle.
  2. Connect the vehicle interface cable to the vehicle interface connector.
    NOTE: Perform a push-pull-push check of the connection.
    G00643671Courtesy of TESLA, INC.
  3. If the circle in the upper right corner does not immediate change to green, click the circle, click Connect Locally  , and then click Connect  .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.