Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTESLA2018MODEL 3 BASEREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM (MODEL 3)TRUNK TRIMGARNISH - TRUNK - REMOVE AND REPLACEREMOVE
2018 Tesla Model 3 Base
Garnish - Trunk - Remove and Replace: Remove
2018 Tesla Model 3 BaseSECTION Remove
- Open the trunk.
- Release the push clips (x2) that attach the ends of the trunk garnish to the body.NOTE: LH shown, RH similar.
- Release the tabs that attach the trunk garnish to the body, and then remove the trunk garnish from the vehicle.NOTE: If the part removed has less tabs than shown in the illustration then the new part must be reworked to remove the extra tabs.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.