Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module - Inductive Charger - Center Console (2.0) - Remove and Replace: Install
2018 Tesla Model 3 BaseSECTION Install
- Position the center console wireless charger module into the center console decor, and then secure the tabs.
- Install the screws that attach the center console wireless charger module to the center console decor.
1.3 N.m (1.0 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- T20 socket
- 4 in extension
- Connect the center console inductive charger module electrical connector, and then fasten the surrounding clips that attach the center console decor to the center console.
- Install the clips (x17) that attach the center console decor trim to the center console.
- Close the center console armrest.
- Move the front seats to the original position.
- Close the front doors.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.