Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
End Panel - Center Console - Remove and Replace: Remove
2018 Tesla Model 3 BaseSECTION Remove
- Remove the center console lower rear panel. See PANEL - LOWER REAR - CENTER CONSOLE (REMOVE AND REPLACE) .
- Remove the center console air vent panel. See ASSEMBLY - REAR VENT - CENTER CONSOLE (REMOVE AND REPLACE) .
- Remove the bolts (x2) and release the clips (x6) that attach the center console end panel to the center console, and then remove the end panel from the console.
1.1 N.m (.8 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
- 4 in extension
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.