Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Assembly - Rear Vent - Center Console - Remove and Replace: Remove
2018 Tesla Model 3 BaseSECTION Remove
- Move the driver seat and front passenger seat forward.
- Use a plastic trim tool to release the clips (x4) that attach the center console rear vent assembly to the center console, and then separate the rear vent assembly from the center console.CAUTION: The rear vent assembly is still attached by an electrical connector.
- Disconnect the electrical harness from the center console rear USB hub connector, and then remove the center console rear vent assembly from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.