Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSTESLA2018MODEL 3 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSTECHNICAL BULLETINSTECHNICAL SERVICE BULLETINSCOLLISION/AVOIDANCEUPDATE VEHICLE SOFTWARE TO ENLARGE VISUAL WARNING INDICATORS (SB-24-00-003)

2018 Tesla Model 3 Base

Update Vehicle Software To Enlarge Visual Warning Indicators (SB-24-00-003)

2018 Tesla Model 3 BaseSECTION Update Vehicle Software To Enlarge Visual Warning Indicators (SB-24-00-003)

Publication date: 2024-02-17
Reference number: SB-24-00-003

UPDATE VEHICLE SOFTWARE TO ENLARGE VISUAL WARNING INDICATORS

TECHNICAL SERVICE BULLETIN

Reference Number(s): SB-24-00-003, Date of Issue: February 17, 2024

TESLA:	2012 - 2023 Model S; 2016 - 2024 Model X; 2017 - 2023 Model 3; 2019-2024 Model Y; 2024 Cybertruck
CLASSIFICATION:	Recall Bulletin
GROUP:	00 - Inspection & Service
TESLA, INC.:	Service Bulletin
MOBILE SERVICE:	Can Perform (where permitted)
CONFIGURATION:	All
COUNTRY/REGION:	United States, Mexico, South Korea, Puerto Rico
BUILD LOCATION:	All

SERVICE INFORMATION

The model(s) and model year(s) listed are a general approximation of the affected VIN list. Refer to the VIN/Bulletin Tracker or Customer/Vehicle profile to determine applicability of this bulletin for a particular vehicle.

NOTE: Recall Bulletin: Recall Bulletins are mandatory service procedures that, unless they can be completed via a software update that a customer installs through the normal course of ownership, must be carried out by Tesla-certified Service Centers. Recall work performed by uncertified technicians could lead to unsafe conditions or voided warranty provisions.

CONDITION

On affected vehicles in the aforementioned markets, the letter font size of the Brake, Park, and Antilock brake system (ABS) visual warning indicators is smaller than the height required by the applicable safety standard.

CORRECTION

Inspect the vehicle software version and, if necessary, update the vehicle software to the version listed below or a later version, any of which increases the letter font size of the Brake, Park, and Antilock brake system (ABS) visual warning indicators to the height required by the applicable safety standard.

Correction Description	Correction	Time
Inspect Vehicle Software Version; No Update Necessary	S012400003	0.06
Inspect and Update Vehicle Software To Enlarge Visual Warning Indicators	S022400003	0.06

PROCEDURE

On the vehicle touchscreen, touch Controls (vehicle icon) > Software , and then scroll down to display the vehicle software version.

If the vehicle is operating with the software version listed below or a later version, no further action is necessary. Use correction code S012400003.
If the vehicle is operating with a software version earlier than listed below, update the software to the version listed below or a later version. Refer to:

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.