Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Horn Assembly - Remove and Replace: Install
2018 Tesla Model 3 BaseSECTION Install
- Position the horn assembly for installation, and then connect the electrical connectors (x2) to the horn assembly.
- Install the bolt that attaches the horn assembly to the front subframe.
12 N.m (8.8 ft-lbs)
NOTE: Use of the following tool(s) is recommended:- 10 mm socket
- 6 in extension
- Install the clips (x7) that attach the front portion of the LH front wheel arch liner to the vehicle.
- Center the steering wheel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.