SIM Card - Car Computer - Remove and Replace: Remove

2018 Tesla Model 3 BaseSECTION Remove
  1. Remove the car computer connectivity board. See CONNECTIVITY BOARD - CAR COMPUTER (HW2.5) (REMOVE AND REPLACE)Β .
  2. Use a trim tool to move the catch to the right, and release the SIM card from the slot in the car computer.
    G14748298Courtesy of TESLA, INC.
  3. Remove the SIM card from the car computer.
    G14748299Courtesy of TESLA, INC.
  4. Destroy the SIM card by cutting the card in half through the center of the gold pads, and then cut each piece into half, resulting in 4 pieces.
    CAUTION: It is mandatory to destroy the SIM card to protect user data.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.