Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Adjust Headlights Using a Wall
2018 Tesla Model 3 BaseSECTION Adjust Headlights Using a Wall
- Enter headlight adjustment mode:
- On the vehicle touchscreen, touch Controls > Service > Adjust Headlights .
- If prompted to calibrate the headlights (Figure A), continue to substep 3. If prompted to adjust the headlights (Figure B), skip to step 2.NOTE:
Figure A
NOTE:Figure B
- Follow the prompts on the touchscreen to calibrate the headlights. Calibration is complete when all 4 checks have transitioned from "red" to "green".NOTE: The calibration drive can take up to 2 km.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.