Torque Specifications

2018 Tesla Model 3 BaseSECTION Torque Specifications
TORQUE SPECIFICATIONS: MODULE - BODY CONTROLLER - LH (RHD) (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Nut that attaches the 12V cable to the LH body controller module 8.5 N.m (6.3 ft-lbs) 
  • 10 mm 12-point deep socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 4 in extension
Replace  
Nut that attaches the LH body controller module to the vehicle 6 N.m (4.4 ft-lbs) 
  • 10 mm 12-point deep socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 2 in extension
Replace  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.