Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 LE, STANDARD TRANSREPAIR AND DIAGNOSISBODY & FRAMEGLASS/WINDOWS/MIRRORS (2)DIAGNOSTIC INFORMATION AND PROCEDURESPOWER WINDOW CONTROL SYSTEM SYMPTOM DIAGNOSIS
2013 Suzuki SX4 LE, Standard Trans
Power Window Control System Symptom Diagnosis
2013 Suzuki SX4 LE, Standard TransSECTION Power Window Control System Symptom Diagnosis
POWER WINDOW CONTROL SYSTEM SYMPTOM DIAGNOSIS
| Condition | Possible Cause | Action |
|---|---|---|
| All power windows do not operate | Circuit fuse blown | Replace fuse and check for short circuit . |
| Power window main switch faulty | Check power window main switch referring to POWER WINDOW MAIN SWITCH INSPECTION . | |
| Ignition switch faulty | Check ignition switch referring to IGNITION SWITCH INSPECTION . | |
| Wiring or grounding faulty | Repair circuit . | |
| Only one power window does not operate | Power window main switch faulty | Check power window main switch referring to POWER WINDOW MAIN SWITCH INSPECTION . |
| Power window sub switch faulty | Check power window sub switch referring to POWER WINDOW SUB SWITCH INSPECTION . | |
| Wiring and/or coupler faulty | Check wiring and/or coupler . | |
| Power window regulator faulty | Check window regulator . | |
| Power window motor faulty | Check power window motor . | |
| Wiring or grounding faulty | Repair circuit . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.