SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSCONTINUOUSLY VARIABLE TRANSAXLE (CVT)DIAGNOSTIC INFORMATION AND PROCEDURES"P" RANGE TESTNOTES
2013 Suzuki SX4 Crossover, Automatic CVT Trans

"P" Range Test: Notes

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Notes
WARNING: If a "P" range test is performed without making sure that the area around the vehicle is clear of persons and objects, there is a risk of severe personal injury or death. Make sure that the area downhill from and around the vehicle is clear of persons and objects before performing the test, and remain watchful during the test.
  1. Stop vehicle on a slope of 5 degrees or more, shift select lever to "P" range and at the same time apply parking brake.
  2. After stopping engine, depress brake pedal and release parking brake.
  3. Then, release brake pedal gradually and check that vehicle remains stationary.
  4. Depress brake pedal and shift select lever to "N" range.
  5. Then, release brake pedal gradually and check that vehicle moves.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.