Terminal Arrangement of 4WD Control Module

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Terminal Arrangement of 4WD Control Module
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Terminal Arrangement Of 4WD Control Module
G06868317Courtesy of SUZUKI OF AMERICA CORP.
TERMINAL ARRANGEMENT OF 4WD CONTROL MODULE

Terminal Circuit Terminal Circuit
G26-2 Coupling assembly (ground) G26-14 "4WD lock" switch
G26-3 Coupling assembly (power) G26-21 Data link connector (DLC)
G26-10 Ground G26-22 CAN communication line (high)
G26-11 Power source for internal memory G26-23 CAN communication line (low)
G26-12 Power source G26-24 Coupling air temperature sensor (ground)
G26-13 "4WD" switch G26-25 Coupling air temperature sensor (power)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.