SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 97 (TRANSFER)REPAIR INSTRUCTIONSTRANSFER RIGHT CASE AND LEFT CASE DISASSEMBLY AND REASSEMBLYDISASSEMBLY
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Transfer Right Case and Left Case Disassembly and Reassembly: Disassembly

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Disassembly
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove oil seals from right case (1) using special tool, if necessary.

    Special Tool 

    (A): 09925-15410 

    Fig 1: Removing Oil Seals From Right Case Using Special Tool
    G06867421Courtesy of SUZUKI OF AMERICA CORP.
  2. Remove oil plate (1) from right case (2), if necessary.
    Fig 2: Removing Oil Plate From Right Case
    G06867422Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove oil seals from left case using flat end rod or the like, if necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.