SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 76 (AIR CONDITIONING SYSTEM - MANUAL A/C)REPAIR INSTRUCTIONSA/C REFRIGERANT PRESSURE SENSOR REMOVAL AND INSTALLATIONINSTALLATION
2013 Suzuki SX4 Crossover, Automatic CVT Trans

A/C Refrigerant Pressure Sensor Removal and Installation: Installation

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: A/C REFRIGERANT PRESSURE SENSOR AND ITS CIRCUIT INSPECTION: MANUAL A/C 

Reverse removal procedure noting the following instructions.

  • Apply compressor oil to O-ring of A/C refrigerant pressure sensor.
  • Tighten A/C refrigerant pressure sensor to specified torque.

    Tightening torque 

    A/C refrigerant pressure sensor (a): 11 N.m (1.1 kg-m, 8.0 lbf-ft) 

    Fig 1: Identifying A/C Refrigerant Pressure Sensor
    G06867675Courtesy of SUZUKI OF AMERICA CORP.
  • Evacuate and charge the A/C system referring to "EVACUATION " and "CHARGE " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.