Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rollover Sensor
Connector Part Information
OEM: 6189-6936
Service: -
Description: 6-Way F 0.64 Series Sealed (YE)
Terminal Part Information
Pins: 1, 6
Terminal/Tray: 8100-3427/22
Core/Insulation Crimp: K/K
Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
Pins: 3, 4, 4, 5
Terminal/Tray: 8100-3426/22
Core/Insulation Crimp: J/J
Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | RD/WH | 1340 | Battery Positive Voltage |
| 2 | - | - | Not Used |
| 3 | D-GN | 5060 | Low Speed GMLAN Serial Data |
| 4 | D-GN | 5060 | Low Speed GMLAN Serial Data |
| 5 | YE/BK | 5229 | Roll Over Sensor High Signal |
| 6 | BK/WH | 651 | Ground |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.