Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 55 (PRECAUTIONS)PRECAUTIONSPRECAUTIONS FOR VEHICLES EQUIPPED WITH A SUPPLEMENTAL RESTRAINT (AIR BAG) SYSTEMNOTES
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Precautions for Vehicles Equipped with a Supplemental Restraint (Air Bag) System: Notes
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Notes
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The figure shows all air bag system components. Failure to follow the proper procedures when servicing (removing, reinstalling and inspecting) any of these components, could result in personal injury due to accidental air bag activation, damage to components, or non-activation of the air bag system in the event of a collision. When servicing any of the air bag components, be sure to take the following precautions:
- Be sure to follow the procedures described in PRECAUTIONS ON SERVICE AND DIAGNOSIS OF AIR BAG SYSTEM (Except advanced Air Bag) or PRECAUTIONS ON SERVICE AND DIAGNOSIS OF AIR BAG SYSTEM (Advanced Air Bag).
- If the air bag system and another vehicle system both require repair, repairing the other system prior to the air bag system may increase the chance of unintended activation of the air bag system and possible personal injury. SUZUKI recommends that the air bag system be repaired first.
- Modifying any parts supporting or surrounding the air bag system components can adversely affect the performance of the system and lead to personal injury. Do not modify the steering wheel, dashboard or any other parts that are near the air bag system components.
- For a vehicle equipped with an advanced air bag system, modifying in any way the driver's and front passenger's seats or adding seat covers or additional cushions to them may prevent the air bag system from working properly, increasing the risk of a personal injury. Do not modify the front seats or add any seat covers or additional cushions to them.
- High temperatures over 93 °C (200 °F) may activate the air bag system or damage its components. Before performing paint baking or other operations that involve high temperatures, remove the air bag system components from the vehicle and place them in an area away from the area where such operations are to be performed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.