Fastener Caution

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Fastener Caution
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Failure to use correct fasteners or to properly use fasteners can cause parts or system damage.
  • When fasteners are removed, always reinstall them at the locations from which they were removed.
  • All fasteners must be replaced with fasteners having the same part number. If a fastener of the correct part number is not available, a fastener of the same size having equal or higher strength may be used.
  • This manual identifies and indicates special conditions for all non-reusable fasteners and fasteners requiring the use of thread-locking compound. Be sure to follow all instructions, including torque values.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.